10 Years manufacturer Miniature circuit breaker-FTB3LE to Mexico Manufacturers
Exterior and dimensions
Reliable quality and good credit standing are our principles, which will help us at a top-ranking position. Adhering to the tenet of "quality first, customer supreme" for 10 Years manufacturer Miniature circuit breaker-FTB3LE to Mexico Manufacturers, We appreciate your enquiry and it's our honor to work with every friend worldwide.
|Model||FTB3LE Residual current circuit-breaker|
|Number of poles||IP+N,2P,3P,3P+N,4P|
|Rated frequency:||AC 50/60Hz|
|Rated voltage (V) AC||230/400|
|Rated current (A)||CD||6, 10, 16, 20, 25, 32, 40, 50, 636,10,16,20,25,32,40|
Rated residual operating current(mA)
Rated residual non-operating current(mA)
|Residual current breaking time||30mA≦0.1s 250mA≦0.04s|
|Rated short-circuit breaking capacity (KA)||40～63A6～32A||1012|
|Rated residual current breaking capacity(KA)||4.5|
|Mechanical & electrical life:||20,000 operations|
|Installation||On DIN rail 35mm according to JB6525|
|Connection capacity:||Cross-section of conductors up to 25mm², Cross-section of busbar from 0.8-2mm²,reversibility of connections|
|Tightening torque||2 Nm|
|Ambient temperature (°C)||-5°C ~ +40°C|
|Relative air humidity||no more than 95%|
|Installation condition||Used in place without obvious shock and vibration|
Exterior and dimensions
|Number of poles||width(mm)||Modules|
|1 / 2||54||3|
|2 / 2||72||4|
|3 / 3||100||5.5|
|3 / 4||112.5||6.25|
|4 / 4||130.5||7.25|
An HVAC company installed a larger air conditioning unit that required more amperage than the previous unit, and didn’t install the correct circuit breaker. Melted numerous circuit breakers and the main service panel.
NOTE: BEFORE WATCHING THE VIDEO, PLEASE READ ALL INSTRUCTIONS AND SAFETY INFORMATION INCLUDED WITH THE KIT AND NEVER WORK ON ENERGIZED EQUIPMENT
Tutorial for installing the HOM4RK2LA retaining kit into a Homeline single phase 125A maximum convertible mains load center. The HOM4RK2LA retaining kit secures one Homeline 2-pole branch circuit breaker to the Right side of the interior when used as a Back-Fed Main Breaker.
This retaining kit can ONLY be used for the Homeline, 100-125amp, Convertible main load centers, Series S01 and S02 and Plug-On Neutral Series S04 load centers. The retaining bracket will mount over the face of the back-fed branch breaker and get secured using the single interior mounting screw included with the kit.
NOTE: HOM-GFI and HOM-AFI branch circuit breakers are NOT suitable for use as back-fed main circuit breakers.
To learn more, please visit the Schneider Electric FAQ: