17 Years manufacturer XJM7 Measuring Box (Low Voltage Power Measurement Box) to Congo Factories

Overview:



Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for 17 Years manufacturer XJM7 Measuring Box (Low Voltage Power Measurement Box) to Congo Factories, For further information, please do not hesitate to contact us. All inquiries from you will be highly appreciated.


USE:

XJM7 series of lighting Power metering box is suitable in power centralized measurement management of apartment buildings office buildings. Pulse-type power meter can be installed  to according to the design needs to achieve computer management. Besides, proper location is preserved to install remote-measuring remote sensing equipment. There are small circuit breakers installed in the cabinet to protect the line from overload, short circuit. The power meter and circuit breaker rated current are selected by design.

In line with GB7251.1-1997 and 7251.3-1997 standards.

3C certificate:

XJM7 Measuring Box (Low Voltage Power Measu-2





Nice electrician tool kit, use this link to support my channel!

https://www.amazon.com/gp/product/B00QMFF43A/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00QMFF43A&linkCode=as2&tag=meanpc99-20&linkId=c40468b4e2a80e3d98d18489003c6a56

Detailed, easy to follow instructions on how to install an electrical outlet in a new construction outlet box. This is a loop wiring example, meaning there is a piece of romex coming in from the previous outlet or breaker panel, and there is a piece of Romex leaving the outlet box and going to the next outlet.

I also show the correct method to connect two ground wires to one ground lug on the outlet. A lot of people just wrap both ground wires around the screw, but the correct way is to make a pigtail using the two ground wires and an additional piece of wire. Simply wire nut the three wires together, then connect the single wire coming out of the pigtail to the outlet ground.

Also covered in this video – the correct direction to loop your wires around the screws, wrapping the entire outlet with electrical tape when done, and a good method to open up the Romex jacket.

Here is an example of a Multi-wire branch circuit:

http://www.nfphampden.com/mbc.pdf

Related Products

WhatsApp Online Chat !