22 Years Factory Automatic Transfer Switching Equipment-FTQ2E Export to Algeria
Exterior and dimensions
Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for 22 Years Factory Automatic Transfer Switching Equipment-FTQ2E Export to Algeria, We warmly welcome business partners from all walks of life, expect to establish friendly and cooperative business contact with you and achieve a win-win goal.
|Body switch||FTB2-63 MCB Series|
|Rated voltage (V)：||AC 400(4P/3P); AC 230V(2P)/50HZ|
|Rated insulation voltage:||440|
|Rated impulse withstand voltage Uimp(KV):||4|
|Rated breaking Capacity：||6.5|
|Mechanical and electrical life:||electric||6000|
|Operating position:||Normally on,backup on,Normal and backup off|
|Operating transfer time:||≤1.5|
switch automaticly in condition of phase loss, pressure loss ,undervoltage and other power failure,
automatic change and automatic recovery ,automatic change and non automatic recovery,fire fighting
joint control, Manual/automatic adjustion,power/power on/tripping indication,fault alarm
|Controller Operating Voltage:||AC230V/50Hz|
|Undervoltage conversion value:||AC175V(±5)|
|Undervoltage return value:||AC190V(±5)|
|Conversion Delay(normal to backup):||0S-60S adjustable,factory default setting:5S|
|Return Delay（normal to backup:||0S-60S adjustable,factory default setting:5S|
|Size（L×W×H）mm:||248 × 125×121|
* A BRAND NEW 9V ALKALINE BATTERY IS REQUIRED FOR OPERATION. *
1-800-245-9265 Toll-free, Mon – Fri. 8am – 5pm PST (excluding holidays)
With the Breaker ID, you don’t have to shut off power to the entire house, or go through trial-an-error, accidentally shutting off things you don’t want to. A vital tool for both homeowners and contractors, the Breaker ID finds the right circuit breaker every time.
The Breaker ID has two parts: a transmitter that plugs into a circuit via a standard outlet, and sends a signal down the wire connecting that circuit, and a receiver wand which is used to scan the circuit breaker panel.
Simply plug the transmitter into an electrical outlet and then scan your circuit breaker panel twice to identify which breaker operates that outlet. During the first scan, the Breaker ID may indicate more than one breaker as it memorizes each circuit, but on the second scan, the Breaker ID will identify the correct circuit breaker with a green LED light and audio tone.
* Easy 1-person operation
* Scan for easy identification and labeling of all breakers
* Finds breakers faster and more efficiently with no accidental shutoffs
* Automatic calibration
* Lights and audio indicate circuit location
* Units snap together for storage
Zircon products include the StudSensor™ family, the original and best-selling line of stud finders and the OneStep® line of wall scanners with patented CenterVision® technology, as well as metal finding, measuring, and leveling tools for almost every job.
For more information about Zircon stud finders and other products:
Caution: Do not rely exclusively on scanners to locate objects behind a scanned surface. Some objects may not be detectable by your scanner. Use additional information sources such as visible points of entry of pipes and wiring into walls, standard 16” and 24” (41 – 61 cm) stud spacing practices, and construction plans to determine the likely location of hidden objects. Always use caution before drilling or cutting.
WARNING: ALWAYS TURN OFF THE ELECTRIC, GAS, AND WATER SUPPLIES BEFORE PENETRATING A SURFACE. NEVER ASSUME THERE ARE NO LIVE ELECTRICAL WIRES IN A WALL. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN ELECTRIC SHOCK, FIRE, SERIOUS INJURY, AND/OR PROPERTY DAMAGE.
For years experience . We specialized in Motor Control , breakers, contactors ,PLC,HIM . We major deal with brand of Schneider , Siemens ,Mitsubishi, Allen-Bradley, ABB, GE ,Moeller, Omron, SMC,SICK, LS.