24 Years Factory FTHN-12 (XGN15-12) Metal Closed Box ing High Voltage Switchgear to Algeria Factory
Exterior and dimensions
We always believe that one's character decides products' quality, the details decides products' quality ,with the REALISTIC,EFFICIENT AND INNOVATIVE team spirit for 24 Years Factory FTHN-12 (XGN15-12) Metal Closed Box ing High Voltage Switchgear to Algeria Factory, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.
FTHN-12 Indoor exchange metal closed box ring high voltage switchgear is Complete sets of power distribution equipment with 3.6 ~ 12Kv, three-phase, AC 50Hz. It is widely used in the power distribution system of construction and transformation of urban power grids also used in the power supply system of the industrial and mining enterprises, high-rise buildings, residential quarters, hospitals, schools, parks etc for the use of the power acceptance and distribution.
Mainly used for ring network power supply system, for the use of power acceptance and distribution.
Mainly used for ring network power supply and terminal power supply, also suitable for installing into the assembly substation.
This product complies with GB3804-1990, GB3906-2006, GB16926-1997, GB / T11022-1999, GB15166.2-1994, GB1985-1989, GB3309-1989, IEC420-1990 and other standards, and passed all type of test.
Operating environmental conditions
A) Ambient temperature
Maximum temperature: + 40 ℃
Minimum temperature: -15 ℃
Daily average: ≤35 ℃
B) Ambient humidity
Daily average relative humidity: ≤ 95%
Monthly average relative humidity: ≤90%
Daily average vapor pressure: ≤2.2X10-3 Mpa
C) Altitude: no more than 1000m;
D) earthquake intensity does not exceed 8 degrees;
E) Operating place without water dripping, no flammable and explosive hazards, no chemical corrosion of gas and no severe vibration.
Fixing your spotty cord reel is easy!
They always get spotty after a few years, most people just toss them out but it is so very easy to bring them back to life.
Please unplug before you work on the unit and make sure you know how the spring is held it, you don’t want that to get loose and grab you!
EDIT: The darn thing is spotty again already. I need to open it up and bend the contacts some so they press harder on the power ring.