25 Years Factory Miniature circuit breaker-FTG11 to Paraguay Manufacturers


Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

To meet the customers' over-expected satisfaction , we have our strong team to provide our best overall service which includes marketing, sales, designing, production, quality controlling, packing, warehousing and logistics for 25 Years Factory Miniature circuit breaker-FTG11 to Paraguay Manufacturers, We warmly welcome customers from all over the world for any kind of cooperation with us to build a mutual benefit future. We are devoting ourselves wholeheartedly to offer customers the best service.

Model: FTG11
Pole: 1P,2P,3P,4P
Rated current (A): 32,63,100
Rated frequency: 50
Rated operational voltage 400
Rated insulation voltage: 690
operating cycles: on-load 1500
off-load 8500
Rated short-time connecting capacity conduction time:0.1s 30Ie
Rated short-time withstand current conduction time:1s 20Ie
Rated connecting and breaking capacity 3Ie
Rated impulse withstand voltage Uimp(KV): 4
Usage category: AC-22A
 Connecting wire: 6/50
Size: 1P 74.2×17.8×80
2P 7507×3506×80
3P 7507×53.4×80
4P 75.7×71.2×80


  • Learn more about Jovean & Rogy Electrical Holding Co., Ltd, including the specific products they produce.

    Circuit Breaker JVL16-32
    RCBO is applicable to electric circuits with rated voltage 230V AC, frequency 50/60H/z and rated current up to 40Amp.The RCBO provides indirect protection to the operator’s body under such condition that the exposed live parts should be connected to a proper earthing pole. RCBO also provides overcurrent protection to circuits in household, commercial and other similar installations. Moreover,it precents potential fire danger caused by earth fault current in case over-current rotection device fails.

    How to test for standby voltage on the power supply board.
    CLICK HERE for TV Parts: http://www.shopjimmy.com/catalogsearch/result/?q=E701I-A3&utm_source=youtube&utm_medium=E701I-A3&utm_campaign=E701I-A3

    Troubleshooting in this video will apply to a TV that will not power on. If your TV will not turn on, either with the remote or by pushing the power button on it, try these troubleshooting steps.
    In these troubleshooting steps, we will use a multimeter, to check for certain voltages. In order to continue troubleshooting, be sure you have the proper training, experience, skills, and equipment necessary to use a multimeter to check voltages in a TV.
    Try all repairs and troubleshooting at your own risk.
    The first thing that I can do is to check and see if there is a standby light in the front of the TV. Some TVs have the ability to show a standby light, while others do not.
    If I do see a standby light in the front of the TV, that shows that I do have some power going to the front of the TV, but it will just not turn on. We will continue troubleshooting.
    I have removed the back cover off the TV and I will use my meter to check the standby voltage on the power supply. First, identify the power supply in your TV. Then look for a cable that runs from the power supply to the main board. For this TV the standby voltage is 3.3 volts. Some TVs will have the test point on the connection, where the cable connects to the board. We have highlighted this test point in the video.
    When I am testing the point, if I do have the 3.3 volt standby, then it shows that my power supply is most likely good and the main board should be replaced.
    The next board I am going to replace is the main board. I will disconnect all of the cables and then remove the board from the panel by unscrewing it.
    Then attach your replacement board to the panel with the screws and reconnect all of the cables.
    When I am testing the point, if I do not have the 3.3 volt standby, then it shows that my power supply is most likely not working correctly and it should be replaced.
    Here is a video showing how to replace the power supply board.
    The first thing I will do is disconnect all of the cables from the board.
    Next, I will remove the screws that hold the board to the TV panel.
    After I have removed the screws, I can lift the board from the panel. Then I will take my replacement board, line it up correctly and then screw it to the panel, to secure it tightly.
    Then, I can reconnect all of the cables.
    This testing is a great place to start when troubleshooting these symptoms. In some rare cases, if you do have standby, and your TV will not power on, the problem could also be a component on the power supply board. However, to start troubleshooting, it is recommended to replace the main board first.

    TV Repair Made Easy™
    © 2016 ShopJimmy.com, LLC.

    Related Products

    WhatsApp Online Chat !