30 Years Factory Miniature circuit breaker-FTBD for Honduras Factory

Overview:



Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for 30 Years Factory Miniature circuit breaker-FTBD for Honduras Factory, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now


Protection rating: IP20
Installation: On DIN rail 35mm according to JB6525
Connection capacity: Cross-section of conductors up to 25mm², 
Ambient temperature (°C): Cross-section of conductors up to 25mm²,
Altitude (m): ≦4000m
Relative air humidity: no more than 95%
Pollution degree:
Installation condition: Used in place without obvious shock and vibration
Weight (g): 116 /232




Shop Now: http://www.testequipmentdepot.com/amprobe/wire&cabletracers/insp-3.htm?utm_source=youtube&utm_medium=demo+video&utm_campaign=york

The Amprobe INSP-3, wiring inspector is a rugged tester designed to verify building wiring compliance to electrical code, especially voltage drop under load. Identify issues with splices, connections and conductor quality, crucial to safety and performance of the electrical system

-Testing efficiency – relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) is presented on a single large display to save operator time – no scrolling or switching screens needed
-Verifies if wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load
-Meter detects faulty wiring in need of repair without removing outlets cover plates, or panel covers:
-Faulty splices and connections
-Incorrect wiring
-Undersized wiring
-Faulty GFCIs,
-Faulty or incorrectly wired AFCIs
-Incorrect line voltage
-Poor ground quality
-User selectable 0, 10,15 and 20 amps loads to verify performance of the electrical system
-Incorrect wiring or voltage drop test failure is clearly indicated by flashing screen
-Will not trip circuit breakers or blow fuses during the test
-Tests GFCI and AFCI operations
-Check ground quality for safety and ability to support sensitive electronic equipment
-Measure fault currents
-Save money and time by eliminating guess work
-NOTE: The Inspector III does not check the condition of wiring insulation.

Related Products

WhatsApp Online Chat !