Automatic Transfer Switching Equipment-FTQ2E
Short Description:
PC class, Mainly used for power circuit monitoring. When the normal power supply is in the event of failure, it will transfer the power supply from normal power to backup power supply and finish the switching the circuit system.
| Body switch | FTB2-63 MCB Series | |
| Rated voltage (V)： | AC 400(4P/3P); AC 230V(2P)/50HZ | |
| Rated insulation voltage: | 440 | |
| Rated impulse withstand voltage Uimp(KV): | 4 | |
| Rated breaking Capacity： | 6.5 | |
| Mechanical and electrical life: | electric | 6000 |
| Machinery | 10000 | |
| Operating position: | Normally on,backup on,Normal and backup off | |
| Operating transfer time: | ≤1.5 | |
| Electrical class: | CB | |
| Usage category: | AC-33iB | |
| Controller functions: |
switch automaticly in condition of phase loss, pressure loss ,undervoltage and other power failure,
automatic change and automatic recovery ,automatic change and non automatic recovery,fire fighting
joint control, Manual/automatic adjustion,power/power on/tripping indication,fault alarm
|
|
| Controller Operating Voltage: | AC230V/50Hz | |
| Undervoltage conversion value: | AC175V(±5) | |
| Undervoltage return value: | AC190V(±5) | |
| Conversion Delay(normal to backup): | 0S-60S adjustable,factory default setting:5S | |
| Return Delay（normal to backup: | 0S-60S adjustable,factory default setting:5S | |
| Size（L×W×H）mm: | 248 × 125×121 | |
