China Cheap price Miniature circuit breaker-FTG11 to luzern Factories

Overview:



Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces. China Cheap price Miniature circuit breaker-FTG11 to luzern Factories, Our mission is to help you create long-lasting relationships with your clients through the power of promotional products.


Model: FTG11
Pole: 1P,2P,3P,4P
Rated current (A): 32,63,100
Rated frequency: 50
Rated operational voltage 400
Rated insulation voltage: 690
operating cycles: on-load 1500
off-load 8500
Rated short-time connecting capacity conduction time:0.1s 30Ie
Rated short-time withstand current conduction time:1s 20Ie
Rated connecting and breaking capacity 3Ie
Rated impulse withstand voltage Uimp(KV): 4
Usage category: AC-22A
 Connecting wire: 6/50
Size: 1P 74.2×17.8×80
2P 7507×3506×80
3P 7507×53.4×80
4P 75.7×71.2×80





Vizio E601i-A3 Main Board Replacement Tutorial – TV Repair Help
CLICK HERE for Replacement Parts: http://www.shopjimmy.com/catalogsearch/result/?q=E601i-A3

Symptoms commonly caused by a bad main board in this model include:
-No sound
-Loud noise, then TV shuts down
-HDMI inputs non-functional
-TV will not tune channels
-No internet connection
-Internet apps open and TV locks up

Thanks and we look forward to assisting you on your TV repair journey.
In this video we are going to show how to replace the main board in this Vizio E601i-A3 model. We will go over the boards in the TV. Here we have the main board, this takes in all your inputs, so it has your HDMi, RCA connections, VGA, Tuner connection and everything there. So this is your main board here, this cable here goes over to the controls on the side of the TV, where you can turn on your TV, or change the channel. This cable here runs to the power supply board, these two LVDS cables run to the T-Con board, which is right here. These wires go to the speakers.
Over here we have the power supply board, it has one cable here that goes to the main board. Then here it has one cable that goes to the panel and here a connection that goes to where you plug in the TV. That is off the camera shot.
Down here we have the T-con board. The T-con board has the two LVDS cables that go to the main board and then we have two ribbon cables here that go to the panel.
In order to replace the main board, we will want to start by disconnecting all of the cables on here. We will now show a close-up to see how to disconnect them. Disconnect all of these cables and connections and then remove the screws that hold this main board to the panel.
Pull these connections out. Be very careful with the LVDS cables as they are very fragile. So we have disconnected all of the connections, now we will go ahead and remove the screws that hold the board to the panel.
We have removed all of the screws and now we will pull the board off the panel. Then you can put your replacement board in the exact same location that you just removed your other board. Then we will put the screws in to attach the main board to the panel. Then we will reconnect all these cables and connections. Pinch in on the side of these LVDS cables. Push them in tight. There you have it, we have replaced the main board for this TV.
Thank you for watching one of our many tutorials here at Shopjimmy.com. We strive to learn and share new TV Repair tips everyday, subscribe to our YouTube Channel and grow with us, share our videos with your friends to help us spread the savings, and don’t forget to hit that like button.

TV Repair Made Easy™
© 2014 ShopJimmy.com, LLC.

Related Products

WhatsApp Online Chat !