China Gold Supplier for Automatic Transfer Switching Equipment-FTQ2 to panama Factories
Exterior and dimensions
The very rich projects management experiences and one to one service model make the high importance of business communication and our easy understanding of your expectations for China Gold Supplier for Automatic Transfer Switching Equipment-FTQ2 to panama Factories, Let's cooperate hand in hand to jointly make a beautiful future. We sincerely welcome you to visit our company or contact us for cooperation!
|Rated operational voltage Ue(V):||AC400V/50HZ|
|Rated operational current Ie(A):||20,25,32,40,50,63,80,100,125,160,180,200,225,315,350,400,500,630|
|Rated insulation voltage Ui(V):||690V|
|Operating position:||Normal power switch-on, backup power switch-on, Normal power& backup power switch-off|
|Rated controller Operating supply voltage:||AC220V|
|Under-voltage:||Adjustable from 160-200v,factory defaults:170V|
|Over-voltage:||Adjustable from 240-290V,factory defaults:270V|
|Operation Mode:||R:automatic change recovery,S:automatic change but not automatic recovery,F:Generator type|
|Switch-off delay time:||Adjustable from 0-180s,factory defaults:2s|
|Switch-on delay time:||Adjustable from 0-180s,factory defaults:2s|
Like us on Facebook
Follow us on Twitter
Follow us on Instagram
Check out our website
Ecig Emporium is located @
405 Cleveland St
Elyria, Ohio 44035
Kanger Dripbox Starter Kit
Kangertech is once again setting a new trend in vaping technology with the Kanger Dripbox Kit. The Dripbox Kit features the “squonker” design or also known as a bottom feeder to provide a convenient dripper experience without the hassles of dripping. The Subdrip RDA features a juice delivery mechanism at the bottom of the 510 threads which allows e-liquid to saturate the cotton. E-liquid is simply squeezed/refilled using the e-liquid bottle located at the bottom of the device to saturate your cotton and is now ready to be vaped for massive flavor.
The Dripbox Kit features the Subdrip RDA and a Dripmod device all together in one convenient kit. The Subdrip RDA features 0.2ohm cotton drip coils which are easily replaced or can be rebuilt to your own personal preferences. The Subdrip RDA can also be filled from the top as well. The Dripmod device fires at a constant 60W and has a incredible capacity of 7ml due to the bottom feeding design. The Dripmod requires (1) 18650 High Amp Battery (sold separately) and features a Micro USB charging port.
The Dripbox Kit is matched with an incredible budget friendly price catering to all types of people. The Kanger Dripbox Kit is perfect for vapers looking to get that incredible dripper flavor without the hassles of constantly dripping and redripping.
NOTE: The Subdrip RDA and Dripmod device are not compatible with other devices or tanks due to the juice delivery system. Using other types of device or tanks may cause juice to flow down which may damage your device or battery.
Pre-built coils and replacement build decks can purchased in store at Ecig Emporium
Features and Specs:
Dimensions: 4-1/2″ x 1-3/4″ x 7/8″ (Including Subdrip RDA)
Includes the Subdrip RDA and Dripmod
Bottom Feeding Design
Juice Delivery System
May also be Top-Filled
Wattage Output: 60W
Voltage Output: 3.7V
Minimum Resistance: 0.2ohm
7ml e-Liquid Capacity
Use pre-built 0.2ohm drip coils or build your own
Subdrip RDA – Stainless Steel Casing
Dripmod – Aluminum Casing
Requires (1) 18650 High Amp Battery (Sold Separately)
Micro USB Charging Port
Low Resistance Protection
Reverse Battery Protection
Low Battery Warning Indicator
Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.
ETA Überstromschutzschalter 3A 157-P10-KF-3A
Überstromschutzschalter 3A 157-P10-KF-3A Auslösecharakteristik sonstige, Polzahl (gesamt) 1, Bemessungsstrom 3A, Frequenz 0Hz, fotografiert von EIB3D.COM
ETA Miniature circuit breaker 1-p – 157-P10-KF-3A
Miniature circuit breaker 1-p Release characteristic Other, Number of poles (total) 1, Rated current 3A, Frequency 0Hz, photographed by EIB3D.COM
Automat, Einbauautomat, Installationsautomat, LS-Automat, LS-Schalter, Leitungsschutzschalter, MCB, Sicherungsautomat, Verteilereinbaugerät, Überstromschalter, Überstromschutzschalter