Factory making FTHN-12 (XGN15-12) Metal Closed Box ing High Voltage Switchgear to Uruguay Manufacturer

Overview:



Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

We always continually provide you with the most conscientious customer service, and the widest variety of designs and styles with finest materials. These efforts include the availability of customized designs with speed and dispatch for Factory making FTHN-12 (XGN15-12) Metal Closed Box ing High Voltage Switchgear to Uruguay Manufacturer, Our professional technical team will be wholeheartedly at your service. We sincerely welcome you to visit our website and company and send us your inquiry.


OVER VIEW:

FTHN-12 Indoor exchange metal closed box ring high voltage switchgear is Complete sets of power distribution equipment with 3.6 ~ 12Kv, three-phase, AC 50Hz. It is widely used in the power distribution system of construction and transformation of urban power grids also used in the power supply system of the industrial and mining enterprises, high-rise buildings, residential quarters, hospitals, schools, parks etc for the use of the power acceptance and distribution.

Mainly used for ring network power supply system, for the use of power acceptance and distribution.

Mainly used for ring network power supply and terminal power supply, also suitable for installing into the assembly substation.

This product complies with GB3804-1990, GB3906-2006, GB16926-1997, GB / T11022-1999, GB15166.2-1994, GB1985-1989, GB3309-1989, IEC420-1990 and other standards, and passed all type of test.

Operating environmental conditions

A) Ambient temperature

Maximum temperature: + 40

Minimum temperature: -15

Daily average: 35

B) Ambient humidity

Daily average relative humidity: 95%

Monthly average relative humidity: 90%

Daily average vapor pressure: 2.2X10-3 Mpa

C) Altitude: no more than 1000m;

D) earthquake intensity does not exceed 8 degrees;

E) Operating place without water dripping, no flammable and explosive hazards, no chemical corrosion of gas and no severe vibration.





This range of “No Hole” circuit breaker lockouts are ideal for breakers that do not have any built in locking facility. The unique design, with thumb wheel operation clasps onto the switch providing secure locking protection. Can be used with lockout cleats below for hard to lock longer sliding switches and switches with large angular rotation.

CB09 Fits switches 16.5mm wide x 11.6mm thick (usually up to 277 Volt)



00:43 Tool list
00:55 A) Remove power from unit
01:04 B) Remove access panel
01:10 C) Verify Main Circuit Breaker condition
01:36 D) Remove & test the Drive Motor’s fuse
01:42 E) Make Drive Motor’s wiring accessible
01:58 F) Apply power to unit
02:05 G) Test power delivery to Drive Motor’s wiring
02:18 G) 1 If 120VAC is confirmed
02:39 G) 2 a – 2d Test electrical components
03:13 H) Proceed to the next applicable Resolution if required
03:29 I) Restore power to the unit
03:50 For a printed version of these instructions
04:08 Contact
04:20 Video Selection for each Resolution

Gas Rotisserie Drive Motor & Reducer – Table Of Contents

Gas Rotisseries Drive motor & Reducer Resolution 1: Drive Chain inspection https://youtu.be/k_hZzCA95Mo

Gas Rotisseries Drive motor & Reducer Resolution 2: Testing power delivery to the Drive Motor https://youtu.be/hPKo7cDAtXI

Gas Rotisseries Drive motor & Reducer Resolution 3: Drive Motor inspection https://youtu.be/ke7TdPWDg78

Gas Rotisseries Drive motor & Reducer Resolution 4: Reducer inspection https://youtu.be/AjDFtw_QJ6c

Related Products

WhatsApp Online Chat !