Free sample for Miniature circuit breaker-FTB10 to Rotterdam Factory
Exterior and dimensions
We have advanced equipment. Our products are exported to the USA, the UK and so on, enjoying a good reputation among customers for Free sample for Miniature circuit breaker-FTB10 to Rotterdam Factory, We welcome new and old customers to contact us by phone or send us inquiries by mail for future business relationships and achieving mutual success.
|Rated current (A):||6,10,16,20,25,32,40|
|Rated voltage (V):||230|
|Rated impulse withstand voltage Uimp(KV):||4|
|Operating cycle times||/hour||240|
|Conventional non-tripping current:||1.13In||t≤1h|
|Instantaneous tripping type:||C|
|Instantaneous non-tripping current:||t≤0.1s||5In|
|Instantaneous tripping current:||t<0.1s||10In|
|Connection Wire ㎜²:||Min/Max||1/10|
normally a switch like this comes with 3 prongs,
two for switch operation (open and close circuit),
another one is for ground (for the light on/off indication)
the prongs location might differ depends on manufacturer.
however for this rocker switch,
the 1st prong (left in this video) must be connected to power (wire from +ve battery),
2nd prong (middle) goes to your accessory,
3rd prong (right) you can ignore this if you want, as the switch is already in action if you had connected the first two, however there will be no on/off light indicator though..
if you want the indicator turned on when the switch is on (close circuit), connect the 3rd prong to ground or your -ve battery terminal. (be sure to connect the first two prongs correctly) otherwise the light will not give correct on/off indication (as shown in the video)
Electrical cabinets | Power Center | Motor Control Center with fixed and withdrawable units | cabinets for automation, server, LAN and stainless steel | small cabinets for industrial, civil and service sector.