Good quality 100% Automatic transfer switching equipment-FTQ3 Supply to Sudan
Overview:
To be the stage of realizing dreams of our employees! To build a happier, more united and more professional team! To reach a mutual benefit of our customers, suppliers, the society and ourselves for Good quality 100% Automatic transfer switching equipment-FTQ3 Supply to Sudan, Contact with us today! We are ready for the market service now!
Product illustration:
Product Features
The automatic transfer switch ensures the switching and isolation between the primary power supply and the standby power supply.Fully automatic operation ensures that loads are transferred automatically to the secondary source in case of mains failure.
Scope of use
-FTQ3 automatic transfer switch is suitable for the dual power supply system of AC50Hz, rated operational voltage 400V,rated operational current up to 250A.
-It is used for emergency power supply system to switch between two power supply, in order to ensure continuous and reliable electrical power to critical loads.
-It is primarily used in critical installations, for instance, fire protection system, telecommunication, coal mine and shipping,
-Industrial plants,residential buildings,emergency lighting,medical and health care, bank and securities exchange,airport, underground express way,
-Military establishment and similar loads that requires non-interrupted and reliable power supply.
Exterior and dimensions
▲ Plug in type overall and mounting dimensions(63-250A)
Model | Outline dimension(mm) | Installation dimension(mm) | ||||
Length |
Width |
Height |
Length |
Width |
ΦD | |
FTQ3-63/3P |
221 |
283 |
130 |
203 |
163 |
6.5 |
FTQ3-63/4P |
243 |
283 |
130 |
225 |
163 |
6.5 |
FTQ3-250/3P |
258 |
283 |
130 |
240 |
163 |
6.5 |
FTQ3-250/4P |
294 |
283 |
130 |
276 |
163 |
6.5 |
▲ Integrated type overall and mounting dimensions(63-250A)
Model | Outline dimension(mm) | Installation dimension(mm) | ||||
Length |
Width |
Height |
Length |
Width |
ΦD |
|
FTQ3-63/3P |
297 |
198 |
130 |
279 |
163 |
6.5 |
FTQ3-63/4P |
319 |
198 |
130 |
301 |
163 |
6.5 |
FTQ3-250/3P |
334 |
198 |
130 |
316 |
163 |
6.5 |
FTQ3-250/4P |
369 |
198 |
130 |
351 |
163 |
6.5 |
▲ Seperated type overall and mounting dimensions(63-250A)
Model | Outline dimension(mm) | Installation dimension(mm) | ||||
Length |
Width |
Height |
Length |
Width |
ΦD |
|
FTQ3-63/3P |
221 |
198 |
130 |
203 |
163 |
6.5 |
FTQ3-63/4P |
243 |
198 |
130 |
225 |
163 |
6.5 |
FTQ3-250/3P |
258 |
198 |
130 |
240 |
163 |
6.5 |
FTQ3-250/4P |
294 |
198 |
130 |
276 |
163 |
6.5 |
Controller
This is a video on how to build a simple EMP generator step by step. The video shows an Electromagnetic pulse disrupting a cell phone and an electronic handheld video game. The EMP is built using a flash circuit of a disposable camera and with this, the capacitor bank is charged up and the pulse is activated at the electronic device.
English | Español | 中文
Sorry for my monotone voice.
Materials needed:
Soldering iron
Enamel coded wire (thicker the better)
Push button (optional)
On/Off switch
Tape
Flat head screw driver (for prying)
Pliers
Stranded core wire
Disposable camera
Wire Strippers
Sand paper
Tube/cup, or circular object with diameter of 2 inches or about 5 centimeters
Optional:
Multimeter
Alligator clips
Battery holder
EMP schematic diagram: https://www.dropbox.com/s/4pak1c8ejp73zl0/EMP%20Schematic%20diagram.PNG?dl=0
[Let me know if the link does not work]
Like and subscribe for more videos;)
Any questions? Comment them below and I will answer them to the best of my ability.
Be sure to check out my new video, “Can we EMP an IPhone?”: https://youtu.be/4IRCq0fbX48
Instagram: https://www.instagram.com/cameron_jon…
Facebook: https://www.facebook.com/cameroncobb775