Good Quality for Automatic Transfer Switching Equipment-FTQ2E to Czech Manufacturer

Overview:



Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

It is a good way to improve our products and service. Our mission is to develop creative products to customers with a good experience for Good Quality for Automatic Transfer Switching Equipment-FTQ2E to Czech Manufacturer, Looking to the future, a long way to go, constantly striving to become the all staff with full enthusiasm, one hundred times the confidence and put our company built a beautiful environment, advanced products, quality first-class modern enterprise and work hard!


Body switch FTB2-63 MCB Series
Rated voltage (V): AC 400(4P/3P); AC 230V(2P)/50HZ
Rated insulation voltage: 440
Rated impulse withstand voltage Uimp(KV): 4
Rated breaking Capacity: 6.5
Mechanical and electrical life: electric 6000
Machinery 10000
Operating position: Normally on,backup on,Normal and backup off
Operating transfer time: ≤1.5
Electrical class: CB
Usage category: AC-33iB
Controller functions:
switch automaticly in condition of phase loss, pressure loss ,undervoltage and other power failure,
automatic change and automatic recovery ,automatic change and non automatic recovery,fire fighting
joint control, Manual/automatic adjustion,power/power on/tripping indication,fault alarm
Controller Operating Voltage: AC230V/50Hz
Undervoltage conversion value: AC175V(±5)
Undervoltage  return value: AC190V(±5)
Conversion Delay(normal to backup): 0S-60S adjustable,factory default setting:5S
Return Delay(normal to backup: 0S-60S adjustable,factory default setting:5S
Size(L×W×H)mm: 248 × 125×121




All specs were taken from retail units: http://amzn.to/1UnieIE
Extended Fuel Range Video http://youtu.be/RDkL593Wbt0

Finally someone has manufactured an affordable true 30 Amp parallel kit (around $60):http://amzn.to/2o5LWtB

To save time and hassle, I recommend buying the ( http://amzn.to/1Tav3H0 ) Honda parallel cable set and cutting it instead of buying the wire separately and banana plugs. It will save you $20 to do it the way I show, but it will just take a little more time.

Safety Banana Plug ends: (about $25 @ mouser)
565-6729-0 (black) 565-6729-2 (red)
6729-0 6729-2
Pomona Test Plugs & Test Jacks
R/A BANANA PLG BLK
US HTS: 8536698000 ECCN:EAR99 COO:US

You could also use these safety banana plugs: 125037 silvertronic
They are about $2.50 each and come in 5 colors.

Flexible 12 awg wire/cord is called “SO” wire or SOOW, SOEW, etc (about $4)

PUSH BUTTON CIRCUIT BREAKER 30A was purchased off($5) http://amzn.to/1Qi0bOX

Plastic outlet box/cover is from my local home improvement center.(about $1)

Cable holders are from my local home improvement center.(about $1)

RV plug adapter is (about $9) http://amzn.to/1Qi0ERb

Wire 3 HONDA generators together:
I assume you want to use this for your motorhome or trailer. You wire it the exact same way I did in the video, but use 3 sets of wires instead of 2 into the circuit breaker. Then from the circuit breaker you take a 2 lines off, one to each opposing side of the 50amp RV 120/240 plug. BUT this is not 240v compatible. This is strictly 50amps of 120V power. So if your plugging your RV into it you CAN NOT run appliances that use 240V like a dryer. You can run all your 120v appliances like dual AC units, fridge, tv’s, microwave etc. On the 50 amp RV plug, the round is ground(green/bare), opposite that is the neutral(green) and the other two that are opposite each other share the 120v load(blacks)

You could also use this kit http://amzn.to/1TauRYp but you’ll also need the adapter: http://amzn.to/1QhYUr9

Related Products

WhatsApp Online Chat !