High Efficiency Factory FTHN-12 (XGN15-12) Metal Closed Box ing High Voltage Switchgear to Cologne Factory

Overview:



Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

We will devote ourselves to providing our esteemed customers with the most enthusiastically thoughtful services for High Efficiency Factory FTHN-12 (XGN15-12) Metal Closed Box ing High Voltage Switchgear to Cologne Factory, Welcome to contact us if you are interested in our product, we will give you a surprice for Qulity and Price.


OVER VIEW:

FTHN-12 Indoor exchange metal closed box ring high voltage switchgear is Complete sets of power distribution equipment with 3.6 ~ 12Kv, three-phase, AC 50Hz. It is widely used in the power distribution system of construction and transformation of urban power grids also used in the power supply system of the industrial and mining enterprises, high-rise buildings, residential quarters, hospitals, schools, parks etc for the use of the power acceptance and distribution.

Mainly used for ring network power supply system, for the use of power acceptance and distribution.

Mainly used for ring network power supply and terminal power supply, also suitable for installing into the assembly substation.

This product complies with GB3804-1990, GB3906-2006, GB16926-1997, GB / T11022-1999, GB15166.2-1994, GB1985-1989, GB3309-1989, IEC420-1990 and other standards, and passed all type of test.

Operating environmental conditions

A) Ambient temperature

Maximum temperature: + 40

Minimum temperature: -15

Daily average: 35

B) Ambient humidity

Daily average relative humidity: 95%

Monthly average relative humidity: 90%

Daily average vapor pressure: 2.2X10-3 Mpa

C) Altitude: no more than 1000m;

D) earthquake intensity does not exceed 8 degrees;

E) Operating place without water dripping, no flammable and explosive hazards, no chemical corrosion of gas and no severe vibration.





PLEASE NOTE***** Watch on Desktop Player to see Annotations. This particular panel Does Not have a main circuit shut off. If your panel has a main circuit shut .

How to change a circuit breaker in your circuit breaker panel.

In this video I show you how to replace or change a circuit breaker in your electrical panel box. If you have a breaker that is not letting voltage pass through to the .

Touch Electricity at your own risk! Consult a doctor before sticking your hands into outlets! In other words, just because I didn’t die, doesn’t mean you won’t.



Amazon-UK: http://npad.us/neck/2/uk/B01AHJ562U/review
2000w Peak 6000w Apv Low Frequency Pure Sine Wave Inverter Dc 12v Ac 220v/230v/240v Battery Charger Built In Mppt 60amp Solar Controller Lcd Display Remote Ac/battery Priority Selectable.23kg!!1 year Warranty!!general specification:model:apv-20001c Nominal Power:2000w Power:6000w Output Waveform:pure wave/same as input(bypass mode) Ac Output:ac Efficiency:88%(peak)nominal Voltage rms :230vac Frequency:50hz Dc Input: Voltage:12vminimum Start Voltage:10vlow Alarm:10.5v Trip:10v High Alarm:16v Recover:13v Ac charger: Range:194-243vac/164-243vac(w) Rate: 65a Initial for Up:0-15.7vover Protection Shutdown:15.7vremote Control:yes By & protection: Waveform:sine (grid or Voltage:230vac Max.
Ac Voltage:270vac Overload Protection:circuit breaker Short Transfer Switch Rating :30amp Without Connected: Current:30amp Current:35amp:alarm Rated Voltage:12vrated Current:60arated Current:15a Bulk Charge:14.5vfloating Charge:13.5v Equalization Charge:14.5vover Disconnection:14.8v Recovery:13.6v Discharge Disconnection:10.8vover Reconnection:12.3v

Related Products

WhatsApp Online Chat !