High Quality Industrial Factory Automatic Transfer Switching Equipment-FTQ2E for Guatemala Factories


Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for High Quality Industrial Factory Automatic Transfer Switching Equipment-FTQ2E for Guatemala Factories, Our final goal is "To try the best, To be the Best". Please feel free to contact with us if you have any requirements.

Body switch FTB2-63 MCB Series
Rated voltage (V): AC 400(4P/3P); AC 230V(2P)/50HZ
Rated insulation voltage: 440
Rated impulse withstand voltage Uimp(KV): 4
Rated breaking Capacity: 6.5
Mechanical and electrical life: electric 6000
Machinery 10000
Operating position: Normally on,backup on,Normal and backup off
Operating transfer time: ≤1.5
Electrical class: CB
Usage category: AC-33iB
Controller functions:
switch automaticly in condition of phase loss, pressure loss ,undervoltage and other power failure,
automatic change and automatic recovery ,automatic change and non automatic recovery,fire fighting
joint control, Manual/automatic adjustion,power/power on/tripping indication,fault alarm
Controller Operating Voltage: AC230V/50Hz
Undervoltage conversion value: AC175V(±5)
Undervoltage  return value: AC190V(±5)
Conversion Delay(normal to backup): 0S-60S adjustable,factory default setting:5S
Return Delay(normal to backup: 0S-60S adjustable,factory default setting:5S
Size(L×W×H)mm: 248 × 125×121

  • Originally uploaded in 2006… all the bad video is due to the horrible camcorder I was using back then. I tried to clean up the video as best as I could.

    Cab – Carvin GC212C – 2×12 Extention Cabinet with G12T-75 speakers

    Carvin V3 100Watt Amp

    - RMS Power: 25, 50 or 100 watts
    - Output Impedance: 4, 8 or 16ohm switch
    - Input Impedance: 220,000 ohms
    - Channel Tone Controls: BASS, MID, TREBLE, PRESENCE, EQX
    - Ch 1 Sensitivity: 1mV for clipping
    - Ch 2 Sensitivity: 1mV for clipping
    - Ch 3 Sensitivity: 16mV for full output
    - Channels: 3 switching
    - Channel Assignable Reverb
    - MIDI functions: channel, effect loops and Boost switching, 100 available patch locations, 5-pin jack
    - Voiced Line Out: 1.5 VAC @ 100 watts RMS
    - Preamp Tubes: Five 12AX7′s tubes
    - Power Amp Tubes: 4-EL34 matched tubes
    - 120VAC, 300VA; 6A Circuit breaker; 120V/240V selector switch
    - Cabinet Size: 24.25″ wide x 10.5″ high x 9.5″ deep
    - Cabinet: 7-ply premium hardwood
    - Net Weight: 35 lbs

    If you have any question please fill free to post, I will try and respond in a timely matter.

    Thank you for tuning in, more videos lessons are being made and will be uploaded. 

    Facebook - https://www.facebook.com/shredfestival
    Website - http://www.waydecooper.net/
    Band - http://www.continuousaudiotransmission.com/

    Kiesel Guitars – http://www.kieselguitars.com/
    Schecter Guitars – http://www.schecterguitars.com/
    Carvin - http://carvinaudio.com/
    Wampler – http://wamplerpedals.com/
    Gruvgear - http://www.gruvgear.com/fretwraps
    Cakewalk – http://www.cakewalk.com/
    Adobe Creative Cloud – https://www.adobe.com/

    Canon T6i – https://www.usa.canon.com
    Tascam DR-40 – http://tascam.com/products/handheld_recorder/


    Related Products

    WhatsApp Online Chat !