Hot sale Factory Surge protective devices-SPD to Bulgaria Manufacturer
Exterior and dimensions
All we do is always associated with our tenet " Customer first, Trust first, devoting on the food packaging and environmental protection for Hot sale Factory Surge protective devices-SPD to Bulgaria Manufacturer, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.
- The Surge protective devices(SPDs), suitable for residential,commercial and industrial appications, are designed to limit transient overvoltage and run-off lightning currents.
- It provides reliable protection from the destructive effects of lightning and switching
- are lightning current arrsters, they can handle and divert high energy from lightning.
-they are necessary when the installation is exposed to direct lightning(for example when the buiding is equipped with external lightning protection system or powered by aerial lines).
|Model:||Max continuous operationl voltage Uc-(V):||Nominal discharge current In(8/20s)(KA):||Max. discharge current Imax(8/20μs)(KA):||Level of protection Up(KV):||Protection category:|
|Model||Max. continuous operationl voltage Uc-(V)||Impulse current Limp(10/ 350MS)||Nominal discharge current (8/20MS)||Voltage protection level||Follow current interruting rating Ifi||Max. back-up fuse||Response time||Stocking and operating temperature|
http://www.ctelectrical.com/ (203) 723-9052
CT Electrical Services is the leading provider for your Generac Generator, Electrical ,and Solar PV System needs serving
0:05 Hi, this is Bruce Angeloszek from CT Electrical Services. I’m going to show you how to check your oil, and when to.
0:10 It’s important to check your oil every 200 hours, or two years. Whichever one occurs first.
0:14 The first step is to turn off your breaker if its in the running position, and your power is off from the utility.
0:24 The Next step is to turn the machine off manually, by hitting the off controller.
0:30 This is where the dipstick is located on the machine.
0:42 If you have to check your oil. First you want to take off the front cover by pulling up and out.
0:48 Locate the oil fill, and spin the cap off.
0:51 You want to use genuine Generac motor oil 5w30.
0:56 To start the machine. Press the auto button on the controller.
1:01 Once the machine is warm after 30 seconds, open the lid and turn on the main breaker. You now have power back to your house.
This is the remove and replace process for the exhaust system of a silent diesel generator. The root cause of the failure was NOT the capacitor, it was the circuit breaker. Replacing the capacitor DID bring the voltage up to within specs.
I created this video with the YouTube Video Editor (http://www.youtube.com/editor)