Manufacturing Companies for Automatic Transfer Switching Equipment-FTQ5 Export to Canada

Overview:



Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Manufacturing Companies for Automatic Transfer Switching Equipment-FTQ5 Export to Canada, We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits.


Model: FTQ5-125 FTQ5-250 FTQ5-630
Rated current (A): 16,20,25,32,40,50,63,80,100,125 140,160,180,200,250 315,350,400,500,630
Pole: 3,4
Rated operational voltage: AC400V/50Hz
Rated insulation voltage: 800
Rated impulse withstand voltage Uimp(KV): 8
Connecting and breaking capacity: 10Ie
Rated short-time withstand current: 10KA/200ms 10KA/200ms 25KA/200ms
Operating position: Normal power on,backup on,Normal and backup off
Operating transfer time: ≤1.5
Electric class: PC
usage category: AC-33B




Website:http://www.simplying.com/
Email: sales@simplying.com
For years experience . We specialized in Motor Control , breakers, contactors ,PLC,HIM . We major deal with brand of Schneider , Siemens ,Mitsubishi, Allen-Bradley, ABB, GE ,Moeller, Omron, SMC,SICK, LS.



This video from Sears PartsDirect shows what to do if your Kenmore, Frigidaire or Electrolux wall oven won’t heat up after running a self-cleaning cycle. Some wall ovens have a thermal switch on the back of the appliance that trips if temperatures in the oven get too hot. Sometimes, the self-cleaning cycle in your oven can accidently trip that switch because it uses high temperatures to burn off grease and food residue. This video will show you how to access the thermal switch and reset it, and will show you how to replace it if it’s malfunctioning.

Visit us at:

http://www.searspartsdirect.com?sid=soc:youtube:replacing-a-thermal-switch-in-a-wall-oven

Or call 1-800-437-1673 to speak with a parts specialist.

The video includes these parts. Look up your model to make sure you get the right parts for your oven.
Thermal Switch

http://www.searspartsdirect.com/part-number/318004902/0022/628.html?sid=soc:youtube:direct-part-link

Find parts for your wall oven at:

http://www.searspartsdirect.com/wall-oven-parts/c-0125200.html?sid=soc:youtube:snowblower-parts

Or click here to schedule an appointment with a repair technician. https://www.searshomeservices.com/repair#showall

Transcript:
Hi, this is Wayne from Sears PartsDirect. Today we’re going to talk about what to do if your wall oven won’t heat after you ran a self-cleaning cycle. The culprit in this situation is often a tripped thermal switch on the back of the oven. Most Kenmore, Frigidaire and Electrolux electric wall ovens have this safety switch to keep them from overheating. The problem is that this switch sometimes trips when you self-clean the oven because of the high temperature used during that cycle. The self-clean cycle heats the oven to 800 degrees to burn off spills and residue, which the thermal switch can mistake for overheating. If this happens, you can reset the thermal switch by pressing this red reset button. Pressing the button is easy. Getting to the back of the oven is a bit harder. Disconnecting power to the oven by shutting off both circuit breakers. Most oven circuit breakers are double breakers, like this. Open the oven door. Remove the mounting screw that secures the oven to the right side of the cabinet. Repeat the process to remove the mounting screw from the left side of the oven. Some models use brackets like these to hold the oven in place. In that case, you won’t see mounting screws. If your oven has these brackets, use this special tool to release the mounting brackets. With someone’s help, carefully pull the oven out of the cabinet and rest it on a sturdy worktable. Remove all of the screws that secure the back panel to the oven frame. Support the panel as you pull out the last screw to keep it from falling. Lift and remove the back panel from the cabinet. Here’s that thermal switch. Press the red button to reset it. Before you put the oven back together, take a look at the wiring and make sure none of the wires are broken or damaged. This video shows how to repair wires in an oven correctly. Reinstall your oven in the cabinet and restore power. See if the oven heats. If it does, you’ve probably fixed the problem. Keep in mind that repeated tripping of the thermal switch will weaken this component. Replace the thermal switch if it won’t reset or if it trips repeatedly during normal oven operation. Here’s a video showing you how. Keep an eye out for burned cookies to make sure that oven’s not overheating. If the oven overheats in the normal baking mode or doesn’t heat after resetting the thermal switch, then you’ll need to have a service technician examine the oven and repair the problem. Hey, I hope this video helped you out today. Be sure to check out our other videos here on the Sears PartsDirect YouTube channel, and don’t forget to subscribe.

Related Products

WhatsApp Online Chat !