Massive Selection for Automatic Transfer Switching Equipment-FTQ2E to Kenya Factories


Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

It is our responsibility to meet your needs and efficiently serve you. Your satisfaction is our best reward. We are looking forward to your visit for joint growth for Massive Selection for Automatic Transfer Switching Equipment-FTQ2E to Kenya Factories, Our aim is to help customers realize their goals. We are making great efforts to achieve this win-win situation and sincerely welcome you to join us

Body switch FTB2-63 MCB Series
Rated voltage (V): AC 400(4P/3P); AC 230V(2P)/50HZ
Rated insulation voltage: 440
Rated impulse withstand voltage Uimp(KV): 4
Rated breaking Capacity: 6.5
Mechanical and electrical life: electric 6000
Machinery 10000
Operating position: Normally on,backup on,Normal and backup off
Operating transfer time: ≤1.5
Electrical class: CB
Usage category: AC-33iB
Controller functions: switch automaticly in condition of phase loss, pressure loss ,undervoltage and other power failure,

automatic change and automatic recovery ,automatic change and non-automatic recovery,fire fighting

joint control, Manual/automatic adjustion,power/power on/tripping indication,fault alarm

Controller Operating Voltage: AC230V/50Hz
Undervoltage conversion value: AC175V(±5)
Undervoltage  return value: AC190V(±5)
Conversion Delay(normal to backup): 0S-60S adjustable,factory default setting:5S
Return Delay(normal to backup: 0S-60S adjustable,factory default setting:5S
Size(L×W×H)mm: 248 × 125×121

  • This video shows you how to wire up a power seat. This is a great way to upgrade and add value to your car as well as give it that luxury feel. The car in this video is a Honda Accord 1998.2002 but this wiring will work for any car make or model. it is also a safe way to wire your car. First find your cars wire diagram or test by adding power to one wire and ground each other wire., until you figure out which wire gives the unit power and which is the ground for that power. Then run the negative wire and positive wire to a mini fuse tap. and use a 20v fuse for car seat. So when deciding which fuse to tap into find one fuse that is all ready that amp. you want 20v because that would be normal fuse for a power seat. if you are wiring a smaller accessorie you would use a smaller fuse. you might want to have a bag of fuse because you could end up blowing a few before you figure out which wire is which. usually black wire is ground. but keep in mind a power or ground wire can be any color. another was to test is to get someone with the same car and use a wire tester, which are very cheap . this is a simple and safer method if you don’t have wire diagram. it will tell you exactly which wire is power and which is ground. That is basically all there is to wiring a power seat into your car.

    Related Products

    WhatsApp Online Chat !