OEM/ODM Factory for FTHN-12 (XGN15-12) Metal Closed Box ing High Voltage Switchgear Export to Iran


Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for OEM/ODM Factory for FTHN-12 (XGN15-12) Metal Closed Box ing High Voltage Switchgear Export to Iran, Our professional technical team will be wholeheartedly at your service. We sincerely welcome you to visit our website and company and send us your inquiry.


FTHN-12 Indoor exchange metal closed box ring high voltage switchgear is Complete sets of power distribution equipment with 3.6 ~ 12Kv, three-phase, AC 50Hz. It is widely used in the power distribution system of construction and transformation of urban power grids also used in the power supply system of the industrial and mining enterprises, high-rise buildings, residential quarters, hospitals, schools, parks etc for the use of the power acceptance and distribution.

Mainly used for ring network power supply system, for the use of power acceptance and distribution.

Mainly used for ring network power supply and terminal power supply, also suitable for installing into the assembly substation.

This product complies with GB3804-1990, GB3906-2006, GB16926-1997, GB / T11022-1999, GB15166.2-1994, GB1985-1989, GB3309-1989, IEC420-1990 and other standards, and passed all type of test.

Operating environmental conditions

A) Ambient temperature

Maximum temperature: + 40

Minimum temperature: -15

Daily average: 35

B) Ambient humidity

Daily average relative humidity: 95%

Monthly average relative humidity: 90%

Daily average vapor pressure: 2.2X10-3 Mpa

C) Altitude: no more than 1000m;

D) earthquake intensity does not exceed 8 degrees;

E) Operating place without water dripping, no flammable and explosive hazards, no chemical corrosion of gas and no severe vibration.

Ron shows you the SureTrace™ Circuit Tracer from IDEAL INDUSTRIES. The SureTrace™ series of tracers can be used to trace wires behind walls, floors, and ceilings in a building. Can be used on energized or de-energized circuits from 0-600 V AC or DC. The very powerful transmitter and sensitive receiver will help you locate cables throughout a building. The tracer is great tool for Electrical, Utility and Maintenance Contractors to find those circuits back to the source.


Hi folks it’s Ron with ideal industries.
Our line of “Best of class” Sure Trace Circuit Tracers just got better…..
Our models 61–955 61–957 and 61–959 are the next generation step in identifying breakers, tracing circuits and troubleshooting issues that much more efficient and reliable.
You can find them on our website and can learn more about where you can purchase them as well.
Effective circuit tracing and breaker and fuse identification is really all about creating a strong broadcast signal and then receiving that signal. By creating a strong broadcast antennae using proper techniques, which are fully explained in the included instruction manual and having a properly calibrated sensitive receiver, pinpointing the conductor of interest and/or its path is quick and accurate. The key to this is three fold. The transmitted signal strength in this unit is much stronger than traditional tracers. The frequency is much higher and therefore passes through barriers such as walls and concrete much more easily. And the receiver resolves 0-99 relative signal strength, not just 5 sequential LED’s that represent 20% jumps in received signal strength you see in other tracers. In fact, moving the receiver just fractions of an inch immediately indicates if you are getting closer to or further from the conductor which is carrying the signal.
To ease your job, the receivers have bigger and brighter OLED displays that are easy to see in all lighting environments and will rotate depending on how you are holding the meter. Information including signal strength, battery level, energized circuit indication, and sensing modes are all displayed simultaneously in the RC-959 model.
These units can be used to trace energized or non-energized cables from 0 to 600 volts AC or DC throughout a building including electrical circuits in breaker boxes, data and other low voltage cables behind walls, above ceilings and in floors. If you need to work on 480 volts phase to phase, you’re good to go. In fact, the transmitter carries a Cat III 600 volt safety rating.
These tracers were designed for behind the wall tracing but the signal is so strong that tracing through concrete and asphalt parking lots for example is quite possible. In fact, the high sensitivity receiver can often help you identify where a partial short caused by a conductor to conductor burn through has taken place even if buried several feet in the ground. Lighting circuits, alarm circuits, doorbell wire, copper pipe, anything that is electrically conductive can transmit the signal ready for you to trace with the receiver!
Whether you are tracing a deenergized datacom cable, a low voltage alarm circuit, a 120 Volt office circuit, 277 volt lighting circuit or a 480 3 phase motor, you’ll be well covered with one simple kit which includes all of the necessary connectors so that you can quickly accomplish your mission.

electrical contractor
electrical contractor supply
armored electrical cable
electrical cable
transmitter receiver
transmitter and receiver
cable electrical
residential electrical contractor
underground utility contractor
electrical cable wire
commercial electrical contractor
utility contractor
ideal industries
rf transmitter receiver
licensed electrical contractor
electrical contractor insurance
receiver and transmitter
georgia electrical contractor
local electrical contractor
cell phone data cable
electrical service contractor
maintenance contractor
electrical power cable
industrial electrical contractor





Related Products

WhatsApp Online Chat !