Online Exporter DC miniature circuit breaker-FTBD to Angola Manufacturers
Exterior and dimensions
Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for Online Exporter DC miniature circuit breaker-FTBD to Angola Manufacturers, We invites you and your enterprise to thrive together with us and share a bright future in global market.
|Model||FTBD DC miniature circuit-breaker|
|Number of poles||IP||2P|
|Rated frequency:||AC 50/60Hz|
|Rated voltage (V)||125/250||250/500|
|Rated current (A)||1,2,3,4|
|Rated ultimate short-circuit breaking capacity(KA)||6.5|
|Rated current (A)||6,10,16,20,25,32,40,50,63|
|Rated ultimate short-circuit breaking capacity(KA)||20/10||20/10|
|Rated impulse withstand voltage Uimp(KV)||4|
|Mechanical and electrical life:||20000|
|Installation||On DIN rail 35mm according to JB6525|
|Connection capacity:||Cross-section of conductors up to 25mm2, Cross-section of busbar from 0.8-2mm2|
|Ambient temperature (°C)||-25°C ~ +45°|
|Relative air humidity||no more than 95%|
|Installation condition||Used in place without obvious shock and vibration|
Exterior and dimensions
|Number of poles||1P 2P|
Visit our website http://www.breakersupply.com/HMCP400W5 or call 855-879-9044 or to order this Cutler Hammer HMCP400W5, 400 Amp, 600 Volt, 3 Pole Circuit Breaker or any other parts! Mid-South Electrical Supply offers thousands of circuit breakers both new and reconditioned with a 1 year warranty. Our experts have 50 years of experience and are ready to help you get the part you need at the price you want.
This video from Sears PartsDirect shows what to do if your Kenmore, Frigidaire or Electrolux wall oven won’t heat up after running a self-cleaning cycle. Some wall ovens have a thermal switch on the back of the appliance that trips if temperatures in the oven get too hot. Sometimes, the self-cleaning cycle in your oven can accidently trip that switch because it uses high temperatures to burn off grease and food residue. This video will show you how to access the thermal switch and reset it, and will show you how to replace it if it’s malfunctioning.
Visit us at:
Or call 1-800-437-1673 to speak with a parts specialist.
The video includes these parts. Look up your model to make sure you get the right parts for your oven.
Find parts for your wall oven at:
Or click here to schedule an appointment with a repair technician. https://www.searshomeservices.com/repair#showall
Hi, this is Wayne from Sears PartsDirect. Today we’re going to talk about what to do if your wall oven won’t heat after you ran a self-cleaning cycle. The culprit in this situation is often a tripped thermal switch on the back of the oven. Most Kenmore, Frigidaire and Electrolux electric wall ovens have this safety switch to keep them from overheating. The problem is that this switch sometimes trips when you self-clean the oven because of the high temperature used during that cycle. The self-clean cycle heats the oven to 800 degrees to burn off spills and residue, which the thermal switch can mistake for overheating. If this happens, you can reset the thermal switch by pressing this red reset button. Pressing the button is easy. Getting to the back of the oven is a bit harder. Disconnecting power to the oven by shutting off both circuit breakers. Most oven circuit breakers are double breakers, like this. Open the oven door. Remove the mounting screw that secures the oven to the right side of the cabinet. Repeat the process to remove the mounting screw from the left side of the oven. Some models use brackets like these to hold the oven in place. In that case, you won’t see mounting screws. If your oven has these brackets, use this special tool to release the mounting brackets. With someone’s help, carefully pull the oven out of the cabinet and rest it on a sturdy worktable. Remove all of the screws that secure the back panel to the oven frame. Support the panel as you pull out the last screw to keep it from falling. Lift and remove the back panel from the cabinet. Here’s that thermal switch. Press the red button to reset it. Before you put the oven back together, take a look at the wiring and make sure none of the wires are broken or damaged. This video shows how to repair wires in an oven correctly. Reinstall your oven in the cabinet and restore power. See if the oven heats. If it does, you’ve probably fixed the problem. Keep in mind that repeated tripping of the thermal switch will weaken this component. Replace the thermal switch if it won’t reset or if it trips repeatedly during normal oven operation. Here’s a video showing you how. Keep an eye out for burned cookies to make sure that oven’s not overheating. If the oven overheats in the normal baking mode or doesn’t heat after resetting the thermal switch, then you’ll need to have a service technician examine the oven and repair the problem. Hey, I hope this video helped you out today. Be sure to check out our other videos here on the Sears PartsDirect YouTube channel, and don’t forget to subscribe.