Professional Design Automatic Transfer Switching Equipment-FTQ2E to Lahore Importers
Exterior and dimensions
We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Professional Design Automatic Transfer Switching Equipment-FTQ2E to Lahore Importers, We, with open arms, invite all interested buyers to visit our website or contact us directly for further information.
|Body switch||FTB2-63 MCB Series|
|Rated voltage (V)：||AC 400(4P/3P); AC 230V(2P)/50HZ|
|Rated insulation voltage:||440|
|Rated impulse withstand voltage Uimp(KV):||4|
|Rated breaking Capacity：||6.5|
|Mechanical and electrical life:||electric||6000|
|Operating position:||Normally on,backup on,Normal and backup off|
|Operating transfer time:||≤1.5|
switch automaticly in condition of phase loss, pressure loss ,undervoltage and other power failure,
automatic change and automatic recovery ,automatic change and non automatic recovery,fire fighting
joint control, Manual/automatic adjustion,power/power on/tripping indication,fault alarm
|Controller Operating Voltage:||AC230V/50Hz|
|Undervoltage conversion value:||AC175V(±5)|
|Undervoltage return value:||AC190V(±5)|
|Conversion Delay(normal to backup):||0S-60S adjustable,factory default setting:5S|
|Return Delay（normal to backup:||0S-60S adjustable,factory default setting:5S|
|Size（L×W×H）mm:||248 × 125×121|
Lacinia is Walmartlabs’ implementation of Facebook’s GraphQL on Clojure. It supports the full GraphQL spec, a high-performance parser for GraphQL queries built on Antlr4, and efficient and asynchronous query execution.
Hystrix is Netflix’ circuit-breaker implementation. It is a Java library that helps you control the interactions between distributed services by adding latency tolerance and fault tolerance logic.
By combining Lacinia’s resolvers and Hystrix’ highly performant thread-pool and fallback options you can achieve increased performance while also improving your system’s overall resiliency.
In this talk, we will explore the power of these two libraries together.
College Final Year Project.
Year of Recording: 2010
There are three 100W bulbs in the video, and the setting in the breaker is such that only one bulb can be operated. If more than one bulb is operated then the breaker operates. The breaker is touch operated, the touch switch has been designed entirely for the breaker, the breaker can also be controlled remotely. A 433MHz RC module was used for the purpose, the video shows the demonstration of the remote control while switching on the bulbs.
The main project consisted of four parts:
1. Micro-controller and power supply board.
2. Remote controlled touch enabled Circuit Breaker.
3. Process Control Demonstration
4. Inverter Circuit