Professional Design XJM7-K Measuring Box (Outdoor Street Lamp Measurement Control Box) to azerbaijan Factory
Exterior and dimensions
In order to best meet client's needs, all of our operations are strictly performed in line with our motto " High Quality, Competitive Price, Fast Service " for Professional Design XJM7-K Measuring Box (Outdoor Street Lamp Measurement Control Box) to azerbaijan Factory, We are always looking forward to forming successful business relationships with new clients around the world.
XJM7-K measuring cabinet (outdoor street lamp measurement control box) is suitable in power supply line with AC 50HZ, rated voltage(0-380V), as the street lights control of industrial mine, residential quarters, schools and other buildings. Also can be used for control neon lights , underwater lighting, Street lights on/off time and with leakage protection.
In line with GB7251.1-1997 and GB7251.3-1997 standards.
Please SUBSCRIBE my channel and LIKE this video =]
Wireless Remote Control Vibration Alarm for Bicycle (USD$6.81)
DC-DC Converter 3.2V-40V adjustable to 1.25V-35V (USD$1.22)
DC-DC Converter 4.5-60V adjustable Step-Down to 3-35V (USD$1.50)
Vibration Alarm for Bicycle – 9v battery will last long time (USD$2.50)
Playlist with more BBSHD videos: https://www.youtube.com/playlist?list=PL59mIOWSOm9rFcoO_dR0gSrRoVr7qhZKm
My Fast Electric Bicycle setup:
•Bafang BBSHD 1000w 48v (1455watts peak)
•Custom controller settings with 100% throttle enabled at PAS-0 and no speed limit (unloaded wheel spinning at 102kmh with 46T)
•46 tooth chainring (74.1km/h top speed on flat)
•189 RPM at 58.8v (factory settings 160 RPM maximum)
•Homemade 14s 5p 58.8v 14.5Ah battery pack capacity
•1,5 hours safe fast charge (6A 350w charger set at 59v)
•3.65kg battery pack transported inside my backpack connected to the bike with XT90-S high discharge anti-spark connector.
•70x NCR18650PF Panasonic High Current cells
•Waterproof “bare cells” pack style for better cooling
•No BMS for 100% charge (4.2v per cell) = 100% performance!!
•Range (with BBS02 motor): +/-26km in the city / 36km continuous full throttle with only few stops
•V3 Cycle Analyst with with 1.00m ohms shunt
•Bafang C961 display
•2x 15 watts LED headlights (two modes: normal or high bean)
•Waterproof red LED voltmeter to monitor battery sag and performance during the ride.
Throttle / Brake Sensor:
•Left thumb throttle (connected to the BBSHD controller) adapted to road bike handlebar, set up between the brake lever and the bar (almost invisible) mounted on a copper T-joint (used for plumbing, same thickness as the handlebar) the long bit cut in half riveted to the bar with the other bit sticking out enough to mount the throttle.
•Magnetic cut-off sensor in line connected to my mechanical rear brakes
•9kg Trek Road Bike
•Easton (rear) Shimano (front) performance 700c racing wheels with aerodynamic flat spokes
Preparing to replace this old 100 amp CEB fuse panel with a modern 100A. Breaker panel.
Again, space is an issue. and a custom fit is required!