Quality Inspection for FTXL Power Distribution Box for Macedonia Importers

Overview:



Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

Our pursuit and company goal is to "Always satisfy our customer requirements". We continue to develop and design superior quality products for both our old and new customers and achieve a win-win prospect for our clients as well as us for Quality Inspection for FTXL Power Distribution Box for Macedonia Importers, Welcome to set up long-term relationship with us. Best Price For Good Quality in China.


USE:

FTXL power distribution box is suitable for all types of wet and dust places and it is applicable to low-voltage distribution system of the textile, metallurgy, chemical industry, mining, machinery, with three-phase three-pole of rated current less than 630A, four-pole or five-pole, for power supply and lighting distribution with features of flexible, mobile, reliable, safe . The incoming line assemble QSA switch, partition door operated which could reduce the arc damage to the operator. Shunt switch can be flexibly configured and it is feasible to add control equipment, such as time relay, AC contactors, etc according to user requirements.

3C certificate:

hbksfsgk-1





A Pool Cartridge Filter has an O-ring between the filter head and the filter body. If you see water leaking or spraying out at this junction, it’s time to replace this O-ring. This video shows you how to replace the O-ring on a typical pool cartridge filter.

For pool parts, supplies, and more guides, visit:
www.inyopools.com

Step 1
The first step is to shut off power to the pool pump at the circuit breaker. This will stop the flow of water through the pool filter.

Step 2
Next you will have to relieve the pressure that has built up in the pool filter. Note the pressure on the pressure gauge. It will typically read between 15 – 20 psi. To relieve pressure turn the air relief valve on top of the filter counter clockwise. Water will spray out initially as you see the pressure on the pressure gauge go to 0 psi.

Step 3
To access the pool filter cartridge O-ring you will have to take the pool filter head off the top of the filter. Turn the locking knob counter clockwise until you feel the pool filter head is loose. Note: The locking knob does not come off the top of the filter head.

Step 4
Lift the pool filter head off the top of the filter. It may be a little hard to lift initially as you break the O-ring seal between the two pool filter parts.

Step 5
The Pool Filter O-ring should be in a groove in the collar of the filter head. If it’s stretched like this one, it may fall out of the groove – a good indication that it’s time to be replaced. Roll the O-ring out of the groove and off the filter head collar.

Step 6
Clean out the groove with a damp cloth.

Step 7
Inspect the new O-ring for any factory defects like cracks or bulges. Roll the new O-ring into the groove of the filter head.

Step 8
Apply a thin layer of silicon based lubricant onto the Pool Filter O-ring. This will help preserve the O-ring. Do not use petroleum based lubricants, like petroleum jelly as these will deteriorate the O-ring.

Step 9
Replace the pool filter head on top of the pool filter. Position the top so that you can read the pressure gauge.

Step 10
When replacing the filter top, watch that the Pool Filter O-ring doesn’t bulge out of its grove. This becomes more of a problem as the O-ring becomes older and stretches. It should not be a problem with a new O-ring.

Step 11
Hand tighten the locking knob clockwise

Step 12
Turn on power to the pool pump to repressurize the pool filter.

Step 13
The air relief valve should still be open. As the pressure builds, air will be released through the relief valve. When water starts to spray out of the valve, turn the valve clockwise to close it.

Step 14
Check the pressure gauge. It typically reads between 10 – 20 psi but this will vary according to the make of pool cartridge filter or its age.

To view this guide on our website, visit:

http://www.inyopools.com/HowToPage/how_to_replace_the_o_ring_on_a_pool_cartridge_filter_.aspx



http://www.eibmarkt.com/de/products/Siemens-Indus-Sector-LS-Schalter-C10A-1pol-T-70-10kA-5SY4110-7.html
Siemens Indus.Sector LS-Schalter C10A,1pol,T=70,10kA 5SY4110-7
LS-Schalter C10A,1pol,T=70,10kA 5SY4110-7 Auslösecharakteristik C, Polzahl (gesamt) 1, Anzahl der abgesicherten Pole 1, Bemessungsstrom 10A, Bemessungsspannung 400V, Spannungsart AC/DC, Energiebegrenzungsklasse 3, Frequenz 50 … 50Hz, Überspannungskategorie 3, Verschmutzungsgrad 3, Breite in Teilungseinheiten 1, Einbautiefe 70mm, Zusatzeinrichtungen möglich, Schutzart (IP) IP20, Der Leitungsschutzschalter ist der Sicherungsautomat für Kurzschlussschutz. Die Leitungsschutzschalter von Siemens als wichtiger Bestandteil der SENTRON Schutzkomponenten für die Elektroinstallation bieten effektiven Personen- und Anlagenschutz durch sicheres Abschalten im Überlast- und Kurzschlussfall. Ob für Infrastruktur oder für industrielle Anforderungen, Siemens bietet Leitungsschutzschalter für alle Anwendungen und jedes Einsatzgebiet. Die Siemens Leitungsschutzschalter zeichnen sich vor allem aus durch: 1. Effektiven Personen-, Investitions- und Anlagenschutz vor Überlast und Kurzschluss. 2. Einheitliches Zubehör in breiter Vielfalt einfach zu montieren und jederzeit austauschbar. 3. Zuverlässige Sicherheit bei der Installation dank standardmäßig enthaltenem Umgreif- und Berührungsschutz. 4. Werkzeugloses Lösen von der Hutschiene bzw. aus dem Sammelschienenverbund durch komfortable Schieber-Hand-Betätigung. 5. Klar ersichtliche Schaltstellungsanzeige. 6. Datamatrix-Code vorne am Gerät bietet schnell und einfach alle Infos rund um den Leitungsschutzschalter. 7. Normgerechter Schutz mit weltweiten Zulassungen

http://www.eibmarkt.com/en/products/Siemens-Indus-Sector-Miniature-circuit-breaker-1-p-C10A-5SY4110-7.html

Siemens Indus.Sector Miniature circuit breaker 1-p C10A 5SY4110-7
Miniature circuit breaker 1-p C10A Release characteristic C, Number of poles (total) 1, Number of protected poles 1, Rated current 10A, Rated voltage 400V, Voltage type AC/DC, Current limiting class 3, Frequency 50 … 50Hz, Over voltage category 3, Pollution degree 3, Width in number of modular spacings 1, Built-in depth 70mm, Additional equipment possible, Degree of protection (IP) IP20,

Herstellerbestellnummer / Manufacturer SKU: 5SY41107
EAN: 4001869181370
Automat, Einbauautomat, Hochleistungssicherungsautomat, Installationsautomat, LS-Automat, LS-Schalter, Leitungsschutzschalter, MCB, SENTRON, Sicherungsautomat, Verteilereinbaugerät, Überstromschalter, Überstromschutzschalter

Related Products

WhatsApp Online Chat !