Special Price for Miniature circuit breaker-FTB3LE Export to Algeria


Technical data

Product illustration

Tripping characteristic

Exterior and dimensions

Related video

We have a professional, efficiency team to provide quality service for our customer. We always follow the tenet of customer-oriented, details-focused for Special Price for Miniature circuit breaker-FTB3LE Export to Algeria, We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

Product illustration:


Technical Data

Model FTB3LE Residual current circuit-breaker
Number of poles IP+N,2P,3P,3P+N,4P
Rated frequency: AC 50/60Hz
Rated voltage (V) AC 230/400
Rated current (A) CD 6, 10, 16, 20, 25, 32, 40, 50, 636,10,16,20,25,32,40

Rated residual operating current(mA)

AC A 3030,50

Rated residual non-operating current(mA)

ACA 1515,25
Residual current breaking time 30mA≦0.1s  250mA≦0.04s
Rated short-circuit breaking capacity (KA) 40~63A6~32A 1012
Rated residual current breaking capacity(KA) 4.5
Mechanical & electrical life: 20,000 operations
Protection rating IP20
Installation On DIN rail 35mm according to JB6525
Connection capacity: Cross-section of conductors up to 25mm², Cross-section of busbar from 0.8-2mm²,reversibility of connections
Tightening torque 2 Nm
Ambient temperature (°C) -5°C ~ +40°C
Altitude (m) ≤2000m
Relative air humidity no more than 95%
Pollution degree
Installation condition Used in place without obvious shock and vibration
Weight (g) 80 490 610 710 820

Exterior and dimensions


Number of poles width(mm) Modules
1 / 2 54 3
2 / 2 72 4
3 / 3 100 5.5
3 / 4 112.5 6.25
4 / 4 130.5 7.25

Electrical Faults ¦ Fault In Electrical Transmission Line ¦ Reason of faults ¦
Hi everybody, today I will share about Electrical Faults.
More videos:-

An electric power system, a fault or fault current is any abnormal electric current. For example, a short circuit is a fault in which current bypasses the normal load. An open-circuit fault occurs if a circuit is interrupted by some failure. In three-phase systems, a fault may involve one or more phases and ground, or may occur only between phases. In a “ground fault” or “earth fault”, current flows into the earth. The prospective short circuit current of a predictable fault can be calculated for most situations. In power systems, protective devices can detect fault conditions and operate circuit breakers and other devices to limit the loss of service due to a failure.
There are I explain mainly two types electrical faults.
Symmetric fault. And
Asymmetric fault.

Symmetric fault
A symmetric or balanced fault affects each of the three phases equally. In transmission line faults, roughly 5% are symmetric. This is in contrast to an asymmetrical fault, where the three phases are not affected equally.
Asymmetric fault
An asymmetric or unbalanced fault does not affect each of the three phases equally. Common types of asymmetric faults, and their causes:
line-to-line. a short circuit between lines, caused by ionization of air, or when lines come into physical contact, for example due to a broken insulator. In transmission line faults, roughly 5% – 10% are asymmetric line-to-line faults.
line-to-ground . a short circuit between one line and ground, very often caused by physical contact, for example due to lightning or other storm damage. In transmission line faults, roughly 65% – 70% are asymmetric line-to-ground faults.
Reason of faults.
Insulation failure or break down.
Lighting surge.
Unbalance current or voltage.
Voltage drop.
Stability fall.
Mechanical fault in transmission line.
Over voltage.
Under Frequency.
Reversal of power.
Temperature Rise.

Thanks for watching my learning video. Like Share and comment My videos.
Electrical Faults ¦ Fault In Electrical Transmission Line ¦ Reason of faults ¦
More videos please Subscribe my channel Learning Engineering.
content source by https://en.wikipedia.org/wiki/Fault_(power_engineering)

Related Products

WhatsApp Online Chat !